The Registration Form serves two purposes, namely, that of registering the newly initiated members of Pi Tau Sigma and to order certificates and / or jewelry. Please allow four to six weeks to process the material.
Registration Form
§ TYPE all information required ON the certificate side of the Registration Form. Information on a separate sheet is not acceptable.
§ Be sure to type the date of the initiation – this means month, date and year.
§ Do not use one Registration Form to cover more than one initiation.
§ It is recommended that you have the certificates returned to your Faculty Advisor.
§ For jewelry orders, TYPE all information required on the jewelry side of the Registration Form.
Check for National Dues
The National Dues for registering a new member (undergraduate or graduate) for life is $25; $5 of this total goes to the Pi Tau Sigma Endowment.
The check should be made payable to National Pi Tau Sigma and sent to:
National Pi Tau Sigma
GWW School of Mechanical Engineering
Georgia Institute of Technology
Atlanta, Georgia 30332-0405
Attn. Dr. Farrokh Mistree
Check for Jewelry
A check covering the total amount for jewelry should be payable to Award Concepts. This check should be sent to the National Pi Tau Sigma Office with the Registration Form. The cost of jewelry is given below. The company will bill (or refund) you directly for variance between actual cost and your check.
Returned Checks
Orders will not be processed unless checks for the appropriate amount are received. The bank charges the National Pi Tau Sigma Office for $20 for every returned check. This cost will have to be born by the initiate.
Replacing Certificates
Certificates may be replaced for $5. Who pays for the cost of replacement is determined as follows:
§ If the member has lost the certificate then the member is responsible for the payment.
§ If the local chapter made an error in the spelling of the name the chapter is responsible for the cost of the replacement.
§ If the printer made an error that can be shown by our records then certificate will be replaced with no cost to the member or the chapter.
The certificate side of the Registration Form needs to be completed. The check should be made payable to National Pi Tau Sigma. The Registration Form and the check should be sent to the National Pi Tau Sigma Office. Replacement certificate orders may also be included with a regular order to save the handling charge.
Jewelry Replacement
Current cost of jewelry is given below. A jewelry order section of the Registration Form should be completely filled out (please type).
A check for the total amount should be made payable to Award Concepts and be included with your order.
Errors in Engraving will be determined in the same manner as that listed above for certificates.
Special Certificates
Special certificates of recognition for a faculty member who has given outstanding service to Pi Tau Sigma may be purchased from the National Secretary Treasurer. Please plan for such well in advance to accommodate approval and preparation.
Keys and Stoles
Honor stoles and rough metal castings of keys are also available from The University of Missouri-Rolla. For pricing information on these items please see the web site at:
or contact:
Key Chairman, Pi Tau Sigma
Mechanical Engineering Department
University of Missouri-Rolla
Rolla, Missouri 65401
Phone: 573-341-4661 or Fax: 573-341-4607
Pi Tau Sigma Metal Castings
Six inch Casting of Key (needs polishing)
Board for mounting the key is also available.
Please allow 1 to 2 weeks for delivery.
For pricing information on these items please see the web site at
or contact:
Key Chairman, Pi Tau Sigma
Mechanical Engineering Department
University of Missouri-Rolla
Rolla, Missouri 65401
Phone: 573-341-4661 or
Fax: 573-341-4607
Large Brass Casting for Display
The key is about 62" high, 23" wide and weighs 220 lbs. Shipped in rough state, minimum assembly is required. The base shown in the picture is not included.
Please allow four weeks for delivery.
Pi Tau Sigma Jewelry
When making a jewelry order simultaneously with the
submission of new initiates, please include two checks. The check for jewelry should be made
payable to Award
Concepts. Note, the check for dues is made payable to National Pi Tau
Sigma. Current jewelry prices as of
June 1, 1999 are:
1. 10K yellow gold key $45.00
Gold kase key $9.00
2. 10K yellow gold badge $35.00
Gold kase badge $8.00
3. Badge Lavalier with Gold Filled Chain
additional $3.00
4. Not available
5. Tie tack back available for key or badge
additional $1.50
Engraving fee
First initial and last name $2.50
Add $1.00 for individual shipments
Excellence in Mechanical Engineering
Pi Tau Sigma National Webpage Webmaster: Natasha Senkova